Products Description

Armored control cables are fitted with metal armour layer, used for control-signal and low-power circuits.

The armour provides mechanical protection against crushing, impact and abrasion. Widely laid underground, on ships and offshore platforms. Common armour types include SWA steel wire armour and STA steel tape armour.

Multicore structure for control signals and auxiliary power. Outer sheath resists oil, moisture and chemical exposure. Suitable for harsh installation conditions where cables face physical damage risk.

Rated Voltage	450/750 V
Conductor	0.75-10 mm²
Temperature Range	-20℃ ~ +80℃
Insulation resistance	2000 MΩ·km
Minimum bending radius	12× cable OD (armoured)

Application

application

Certificate

ISO Quality Management System Certificate
Verification to IEC 60227-5:2024,
EN IEC 61000-6-1:2019, EN IEC 61000-6-3:2021

certificate 05

1.Construction
S/N	Construction		Requirement
1	Conductor		1 Class 1 copper conductor
2	Insulation		XLPE
3	Inner sheath		PVC
4	Armor		Galvanized steel wire armor
5	Sheath		PVC
2. Cable identification Core identification: Four cores: Blue, Black, Brown, Gray 16：+ Twelve cores: white + number code 3. Standard compliance ICEA S-75-381
4.Application
S/N	Item				Technical requirement
1	Rated voltage				AC 450/750V
2	Operating temperature				'-15~90℃
S/N	No. of cores × sectional area	Structure of conductor	Approx. dia. of conductor	Nominal thk. of insulation	Nominal thk.of sheath	Approx. OD of cable	Approx. weight of cable
	no.× sqmm	no./mm	mm	mm	mm	mm	kg/km
1	4×1.5	1/1.37	1.37	0.6	1.5	14.1	343
2	16×1.5	1/1.37	1.37	0.6	1.7	21.3	855
5. Electrical characteristics
S/N	No. of cores × sectional area ×		Max. DC resistance of conductor@20℃ 20℃			Voltage withstand test
	no.× sqmm		Ω/km			kV/min,no breakdown
1	4×1.5		12.1			3/5
2	16×1.5		12.1			3/5