Products Description
This 12/20kV medium voltage power cable features Class 2 Aluminum Alloy conductors, designed for municipal grids, large industrial zones, and renewable energy power stations. By utilizing aluminum alloy, it significantly reduces the overall cable weight, making it the ideal solution for long-span overhead installations or retrofitting old infrastructures with limited tray load capacity.
Key Parameters
|
Rated Voltage |
12/20kV |
|
Conductor Size |
35mm² - 630mm² (150mm² shown in image) |
|
Temperature Range |
-15℃ ~ +90℃ |
|
Standards |
IEC 60502-1, IEC 60228:2023 |
|
Structure |
Single or Multi-core, Class 2 Aluminum Alloy, XLPE Insulation |
Typical Applications
Utility-scale solar/wind farm collection lines, mine shaft power transmission, urban grid upgrades, and long-distance industrial distribution where cable weight is a critical constraint.
Certificates
DNV & ABS Type Approval
ISO Quality Management System Certificate
IEC 60228:2023 Full Test Reports
Detailed Construction
- Conductor: Class 2 Aluminum Alloy, offering superior creep resistance and lightweight benefits.
- Shielding: Semi-conductive conductor and insulation shields, applied via triple-co-extrusion for a seamless interface.
- Insulation: XLPE (90°C rated), providing high thermal stability and robust short-circuit capacity.
- Testing: Each drum undergoes a 42kV/5min AC voltage withstand test to ensure Partial Discharge levels meet strict safety margins.
Huayu Cable Advantages
- Weight Reduction: Aluminum alloy is 50% lighter than copper for the same ampacity, drastically cutting installation labor and support structure costs.
- Triple-Layer Co-extrusion: The shield and insulation layers are extruded in a single pass, eliminating internal air voids that cause electrical breakdown.
- Marine-Grade Certification: DNV and ABS approvals mean our factory audits exceed standard industrial requirements for mission-critical reliability.
- Full Customization: The spec table is for reference only; we manufacture all sizes from 35mm² up to 630mm² based on your project's BOQ.
- Strict Quality Control: A mandatory 42kV high-voltage test ensures zero-failure performance in heavy-duty 24/7 industrial environments.
- Expert Export Support: Specialized in Middle East and SE Asia markets, providing complete technical consultations and one-stop compliance documentation.
Application
Certificate
ISO Quality Management System Certificate
Verification to Standard: IEC 60502-2:2020, EN IEC 61000-6-1:2019,
EN IEC 61000-6-3:2021
|
1.Construction |
||||||||
|
S/N |
Construction |
Requirement |
|
|||||
|
1 |
Conductor |
2 Class 2 aluminum alloy conductor |
||||||
|
2 |
Insulation |
+XLPEConductor shield, XLPE insulation |
||||||
|
2. Cable identification Core identification: Black 3. Standard compliance B/T 13795, IEC 60228:2023 |
||||||||
|
4.Application |
||||||||
|
S/N |
Item |
Technical requirement |
||||||
|
1 |
Rated voltage |
AC 12/20kV |
||||||
|
2 |
Operating temperature |
'-15~90℃ |
||||||
|
3 |
Allowed bending radius for laying |
≥20 ≥20 times the outer diameter of the cable |
||||||
|
S/N |
No. of cores × sectional area |
Structure of conductor |
Approx. dia. of conductor |
Nominal thk. of insulation |
Nominal thk.of sheath |
Approx. OD of cable |
Approx. weight of cable |
|
|
no.× sqmm |
no./mm |
mm |
mm |
mm |
mm |
kg/km |
||
|
1 |
1×150 |
36/2.32 |
14.3 |
5.5 |
/ |
26.9±2.5 |
793 |
1 |
|
5. Electrical characteristics |
||||||||
|
S/N |
No. of cores × sectional area × |
Max. DC resistance of conductor@20℃ |
Voltage withstand test |
|||||
|
no.× sqmm |
Ω/km |
kV/min,no breakdown |
||||||
|
1 |
1×150 |
0.206 |
42.0/5 |
|||||
Huayu Medium Voltage Cable Benefit
- Built for industrial, utility and offshore medium-voltage power transmission circuits
- Multi-core copper conductors resist harsh outdoor and coastal air conditions
- Solid insulation performs well in damp, salt-spray and oily areas
- Heavy-duty outer sheath copes with underground moisture and chemical splashes
- Option for integrated SWA steel wire armour for burial & open-site mechanical protection
- LSZH / flame-retardant grades available to meet local power rules
- Every lot gets full electrical tests before shipment
FAQs
1.How do you ensure the connection safety of aluminum alloy cables?
We recommend using specialized bimetallic shear-bolt lugs. Our alloy formulation provides excellent creep resistance, preventing terminals from loosening or overheating.
2.Why is the minimum bending radius higher for this cable?
Due to the precise MV internal layers, maintaining a radius of ≥20D prevents micro-cracks in the insulation shield during high-stress installation.
3.Are core configurations other than those in the table available?
Yes. As a direct manufacturer, we customize cross-sections, core counts, and jacket materials to match your specific engineering blueprints.
Hot Tags: cable medium voltage, China cable medium voltage manufacturers, suppliers, factory
