Products Description

Marine Boat Cable for Onboard Electrical Systems

Marine boat cable is used for electrical circuits on boats, yachts and other vessels. This cable range is designed for onboard power wiring where the cable may need to pass through compact spaces, equipment areas and different sections of the vessel.

The cable uses tinned copper conductor, XLPE insulation and SHF1 outer sheath. It is available in different core configurations and conductor sizes for power supply, lighting, auxiliary equipment and other onboard electrical circuits.

A Practical Choice for Boat Wiring

Boat wiring often has to work around panels, machinery, bulkheads and other equipment. A suitable cable construction makes routing and connection easier, especially when several electrical circuits are installed in the same area.
The 0.6/1 kV rating gives this cable a wider application range than low-voltage boat wiring used only for small auxiliary circuits. It can be used for both equipment power supply and general onboard electrical distribution, depending on the vessel design.

Where It Is Used

Boat and yacht electrical systems
Workboats and service vessels
Onboard lighting and auxiliary circuits
Pumps, fans and other marine equipment
Distribution wiring between marine electrical panels and equipment

One Cable Range, Different Vessel Requirements

A small yacht, a workboat and a larger commercial vessel do not have the same cable requirements. Conductor size, number of cores and installation conditions can vary considerably.

Huayu supplies marine boat cable in a wide range of sizes and configurations. This makes it easier to select the cable according to the actual circuit rather than forcing different applications into one standard size.

Marine Standards

The cable is manufactured according to applicable IEC 60092 marine cable requirements, with relevant flame-retardant and low-smoke, halogen-free properties. Marine type approval and certification documents are available for applicable products and projects.

Application

marine application

Certificate

ISO Quality Management System Certificate
ABS/DNV/LR/CCS Approved Certificate

certificate 04

1.Construction
S/N	Construction		Requirement
1	Conductor		2 Class 2 Tinned copper conductor
2	Insulation		XLPE
3	Inner Sheath		SHF1
4	Armor		Tinned copper wire braid
5	Outer Sheath		SHF1
2. Cable identification Core identification: 1C: Natural. 2C: Brown,Blue. 2C+E: Brown,Blue,Green/Yellow. 3C: Brown,Black,Blue. 3C+E: Brown,Black,Grey,Green/Yellow. 4C: Blue,Brown,Black,Grey. 7C or more: Black + number code. Sheath color: Black(Or the color required by the customer.) 3. Standard compliance IEC 60092-353, IEC 60228, IEC 60092-360, IEC 60332-1-2, IEC 60332-3-22, IEC 60754-1~2, IEC 61034-1~2
4.Application
S/N	Item				Technical requirement
1	Rated voltage				AC 0.6/1kV
2	Operating temperature				'-15~90℃
S/N	No. of cores × sectional area	Structure of conductor	Approx. dia. of conductor	Nominal thk. of insulation	Nominal thk.of sheath	Approx. OD of cable	Approx. weight of cable
	no.× sqmm	no./mm	mm	mm	mm	mm	kg/km
1	1×4	7/0.85	2.50	0.7	0.8	8.1	116	1
2	1×50	19/1.76	8.30	1.0	0.9	15.5	652	2
3	1×70	19/2.12	10.20	1.1	1.0	18.0	900	3
4	2×1.5	7/0.52	1.56	0.7	0.8	10.8	163	4
5	2×2.5	7/0.68	2.04	0.7	0.8	11.8	204	5
6	2×4	7/0.85	2.50	0.7	0.9	13.0	256	6
7	2×6	7/1.04	3.04	0.7	0.9	14.4	347	7
8	2×10	7/1.35	3.80	0.7	0.9	16.2	470	8
9	2×16	7/1.7	4.80	0.7	1.0	18.6	648	9
10	2×25	7/2.12	6.20	0.9	1.1	22.6	944	10
11	2×35	7/2.5	7.20	0.9	1.1	24.8	1198	11
12	2×50	19/1.76	8.30	1.0	1.2	27.8	1533	12
13	2×70	19/2.12	10.20	1.1	1.3	32.4	2108	13
14	2×120	37/2.02	13.40	1.2	1.5	40.7	3528	14
15	2×1.5+1.5	7/0.52	1.56	0.7	0.8	11.3	186	15
16	2×2.5+2.5	7/0.68	2.04	0.7	0.9	12.5	243	16
17	2×10+10	7/1.35	3.80	0.7	1.0	17.2	587	17
18	2×50+50	19/1.76	8.30	1.0	1.3	29.8	2022	18
19	2×120+120	37/2.02	13.40	1.2	1.6	43.5	4711	19
20	3×1.5	7/0.52	1.56	0.7	0.8	11.3	186	20
21	3×2.5	7/0.68	2.04	0.7	0.9	12.5	243	21
22	3×4	7/0.85	2.50	0.7	0.9	14.0	338	22
23	3×6	7/1.04	3.04	0.7	0.9	15.3	427	23
24	3×10	7/1.35	3.80	0.7	1.0	17.2	587	24
25	3×16	7/1.7	4.80	0.7	1.0	19.6	816	25
26	3×25	7/2.12	6.20	0.9	1.1	23.8	1199	26
27	3×35	7/2.5	7.20	0.9	1.2	26.4	1557	27
28	3×50	19/1.76	8.30	1.0	1.3	29.8	2022	28
29	3×70	19/2.12	10.20	1.1	1.4	34.9	2807	29
30	3×95	19/2.5	12.10	1.1	1.5	39.7	3801	30
31	3×120	37/2.02	13.40	1.2	1.6	43.5	4711	31
32	3×150	37/2.25	14.90	1.4	1.7	48.0	5761	32
33	3×1.5+1.5	7/0.52	1.56	0.7	0.9	12.4	227	33
34	3×2.5+2.5	7/0.68	2.04	0.7	0.9	13.4	287	34
35	3×35+35	7/2.5	7.20	0.9	1.2	28.9	1963	35
36	4×1.5	7/0.52	1.56	0.7	0.9	12.4	227	36
37	4×2.5	7/0.68	2.04	0.7	0.9	13.4	287	37
38	7×1.5	7/0.52	1.56	0.7	0.9	14.6	334	38
39	10×1.5	7/0.52	1.56	0.7	1.0	18.0	459	39
5. Electrical characteristics
S/N	No. of cores × sectional area ×		Max. DC resistance of conductor@20℃ 20℃			Voltage withstand test
	no.× sqmm		Ω/km			kV/min,no breakdown
1	1×4		4.70			3.5/5
2	1×50		0.391			3.5/5
3	1×70		0.270			3.5/5
4	2×1.5		12.2			3.5/5
5	2×2.5		7.56			3.5/5
6	2×4		4.70			3.5/5
7	2×6		3.11			3.5/5
8	2×10		1.84			3.5/5
9	2×16		1.16			3.5/5
10	2×25		0.734			3.5/5
11	2×35		0.529			3.5/5
12	2×50		0.391			3.5/5
13	2×70		0.270			3.5/5
14	2×120		0.154			3.5/5
15	2×1.5+1.5		12.2			3.5/5
16	2×2.5+2.5		7.56			3.5/5
17	2×10+10		1.84			3.5/5
18	2×50+50		0.391			3.5/5
19	2×120+120		0.154			3.5/5
20	3×1.5		12.2			3.5/5
21	3×2.5		7.56			3.5/5
22	3×4		4.70			3.5/5
23	3×6		3.11			3.5/5
24	3×10		1.84			3.5/5
25	3×16		1.16			3.5/5
26	3×25		0.734			3.5/5
27	3×35		0.529			3.5/5
28	3×50		0.391			3.5/5
29	3×70		0.270			3.5/5
30	3×95		0.195			3.5/5
31	3×120		0.154			3.5/5
32	3×150		0.126			3.5/5
33	3×1.5+1.5		12.2			3.5/5
34	3×2.5+2.5		7.56			3.5/5
35	3×35+35		0.529			3.5/5
36	4×1.5		12.2			3.5/5
37	4×2.5		7.56			3.5/5
38	7×1.5		12.2			3.5/5
39	10×1.5		12.2			3.5/5